Aluminum Welding Repair Calgary
Broken aluminum fixed properly. Fixed written price from photos.
Aluminum welding repair in Calgary for cracked brackets, broken hinges, failed welds, damaged tabs, trailer parts, and aluminum components that need proper prep and controlled TIG welding. Based in Carstairs — 45 minutes north of Calgary. We come to you, or you bring it in.
Avg. reply within 15 minutes during business hours.
Common aluminum repairs in Calgary
Aluminum repair is different from just piling weld onto a crack. Clean prep, oxide removal, fit-up, and heat control matter if you want the repair to hold and still fit properly after.
Cracked aluminum brackets and tabs
Broken mounting tabs, cracked brackets, failed supports, and damaged aluminum attachment points — repaired without warping the part or losing alignment.
Trailer, hinge, and latch repairs
Aluminum trailer parts, hinges, latch areas, cracked corners, damaged frame pieces, and repairs where alignment and function still matter after welding.
Thin or visible aluminum repairs
Aluminum parts where cleaner TIG work matters — thinner sections, visible repairs, and jobs where excess heat or rough weld buildup creates more problems than it solves.
Why aluminum repair needs the right setup
Aluminum gives the best results when the part is clean, accessible, and controlled properly — which is why shop is often the smarter call unless the job has to stay on site.
Why aluminum repairs fail
- Dirty or contaminated base material
- Poor prep around the crack or failed weld
- Too much heat causing distortion
- Welding over the failure without fixing the root cause
- Bad access making proper torch control difficult
- Using the wrong process for the job
What a proper aluminum repair needs
- Proper prep and cleanup before welding
- Good fit-up and access to the joint
- Controlled TIG welding when heat control matters
- Enough support or rebuild where material is torn out
- A repair plan based on the actual failure, not just the crack line
- An honest call on whether it belongs in the shop
If the part can come to the shop, that is usually the best environment for aluminum welding repair in Calgary.
Should your aluminum repair come to the shop?
Many aluminum jobs are better in the shop — cleanliness, positioning, and heat control matter more. Mobile is available when the repair truly needs to stay on site.
Shop is usually better for:
- Small to medium aluminum parts
- Repairs that need the cleanest TIG setup
- Jobs needing extra prep or fit-up time
- Visible aluminum repairs where finish matters
- Parts already removed from the machine or trailer
- Jobs where the best result matters more than convenience
Mobile can work for:
- Mounted aluminum components that are hard to remove
- On-site repairs where removal creates more downtime
- Large aluminum assemblies that are inconvenient to transport
- Situations where shop access is not practical
- Jobs where we confirm upfront that mobile is the right fit
Not sure? Text photos and your Calgary location — we'll tell you which option makes sense for the job.
How aluminum repair quoting works
Aluminum repairs are photo-first and fixed-price. We pay close attention to material condition, crack location, access, and whether the part belongs in the shop.
Step 1
Send photos
One wide shot, one close-up, any extra angles. Show the crack, break, or failed weld clearly.
Step 2
We assess the aluminum part
We look at thickness, access, contamination, break type, and whether TIG repair is the right fit.
Step 3
Shop or mobile confirmed
We tell you which option makes sense for the job — and why. No pressure either way.
Step 4
Written price confirmed
We assign the repair package and confirm the price in writing before anything starts.
Fixed-price aluminum repair packages
We assess the repair from your photos and confirm the price in writing before any work begins. No hourly guessing.
Precision Repair
Contained aluminum repairs. Clear problem, clean fix. Single-issue, fast turnaround.
$395 + GST
Precision Plus
Larger scope, multi-point, or when the aluminum repair carries real consequences if it fails.
$595 + GST
TRUE REPAIR Package
Section rebuilds, multiple failures, or extensive structural aluminum work. Material quoted separately.
$1,145+ + GST
Add-on when needed
Mobile Service Call — Calgary Area
$350 + GST
Added to the repair package when the aluminum job needs to stay on site. Shop is usually the better setup for aluminum — but mobile is available when it makes sense.
Send photos of the aluminum damage. We reply with scope, price, and availability.
Why Calgary clients choose TRUE REPAIR for aluminum
Aluminum-specific repair judgment
Not every cracked aluminum part should be welded, and not every aluminum job should be done on site. We make that call upfront instead of treating every job the same.
TIG where control matters
TIG is the right tool when the aluminum needs cleaner heat control, a more controlled weld bead, and a better finished repair. We use it where it actually makes a difference.
Fixed-price quoting from photos
You send photos first. We assess the repair, assign the package, and confirm the price in writing before work starts. No hourly guessing.
Honest shop vs mobile guidance
Shop is often the best setup for aluminum. If mobile makes sense for your job, we'll say that. Either way, you get a straight answer before committing to anything.
Broken head rack. TIG welded and back on the water.
"Amazing service, transparent pricing and great communication throughout. Would highly recommend."
— Emile M.
New fender welded and blended.
Clean TIG beads along the edge — the client had us match the other side after seeing this one. This is what controlled aluminum welding looks like when the prep and heat are right.
Aluminum welding repair Calgary — FAQ
Common questions before booking an aluminum repair.
Who can fix broken aluminum in Calgary?
If the aluminum part is cracked, broken, or has a failed weld, text us photos and we'll tell you whether it's repairable, whether TIG is the right process, and whether it should come to the shop or be done on site.
What aluminum parts do you repair?
Typical work includes aluminum brackets, trailer parts, hinges, tabs, supports, cracked corners, failed welds, and other aluminum components where fit, strength, and heat control still matter after the repair.
Do you use TIG for aluminum repairs?
Yes. TIG is used where cleaner heat control and a better finished repair matter — which is the case on most aluminum jobs we handle.
Is aluminum repair usually done in the shop or mobile?
Shop is often the better setup for aluminum because access, cleanliness, and control matter more. Mobile is available when the job truly needs to stay on site — we'll tell you which makes sense for yours.
Do you quote aluminum jobs by the hour?
No. We use fixed written pricing. You send photos first, we assess the aluminum repair, and then confirm the package and price in writing before anything starts.
What should I send for an aluminum quote?
Send one wide photo, one close-up, any extra helpful angles, a short note on what failed, and your Calgary location if you think it may need mobile service.
Where are you located?
Our shop is in Carstairs, Alberta — about 45 minutes north of Calgary. We do shop repairs there and mobile welding across Calgary, Airdrie, and Central Alberta.
- Aluminum-specific repair judgment before we touch the job.
- TIG where clean heat control matters — for a better finished repair.
- Fixed price approved in writing before work starts.
- 12-month workmanship warranty on every job.
Text photos of the aluminum damage and your Calgary location. We'll reply with scope, price, and the clearest next step.
Text Photos. Fast Quote.Avg. reply within 15 minutes during business hours. · 587-432-1919